Cement'in P
Cement’in P is a ready-to-use, cement-based mortar that can be applied manually or mechanically as a key coat (slurry coat) on heterogeneous substrates to achieve uniform absorption. Cement’in P is also recommended as a bonding coat.
Yield: ± 1,7 kg/m² per mm of thickness.
Product information
Cement’in P is recommended as a bonding coat (also a base coat) for the pre-treatment of all heterogeneous or highly absorbent substrates, both indoors and outdoors. Cement’in P can be applied to all standard types of masonry and concrete. Non-absorbent substrates must be primed beforehand with the Betoprim bonding coat. This rendering must not be applied to gypsum-based substrates, nor to substrates with adhesion issues (e.g., paint, synthetic resin-bonded coatings, water repellents). The substrate must possess at least the same mechanical properties as the Cement’in P render layer. Substrates with low load-bearing capacity, such as lightweight masonry (aerated cellular concrete) and old masonry, are unsuitable. For these, Cement’in MEGA is recommended.
Cement’in P is available in 25 kg bags.
The shelf life in the original packaging, stored in dry conditions, is 6 months.
